Borg Warner S300 SX-E 9180 -S366 Supercore
The new SX-E series from Borg Warner who takes affordable journal bearing turbochargers to new heights!
These turbochargers has a very high quality and have rigid journal bearings to withstand tough conditions.
A new compressor housing separating visually separating the new series from the old ones. Speed sensor outlet avalible..
500-875hp 13009097049 compressor 91.44 / 66.11 turbine 79.76 / 73.37
Dimensions:
Inlet 4" (102mm)
Outlet 2.5" (63mm)
Oil inlet: 1/4 -18 NPT
Oil outlet hole diameter: 19.05 x 16.0 mm
Oil outlet bolt CC: 51mm
Oil outlet bolt thread: 3/8" -16
This is a supercore. Ie without turbine housing.
All turbine housing mounting hardware, clamp plates and cap screws are included with SuperCore
----------------
Guides & Info
Funkar kalas på min 2JZ-GTE levererade 659hk och 850nm vid 2bar på naven i min e30.
Setup:
Kina "log" grenrör.
3" hurricane intercooler.
Orginal maskin med arp topplocksbultar.
MaxxEcu med EGT på varje cyllinder.
Your review:
To send a review, you must be logged in.
Associated products
Air filter
Vacuum
Oil inlet
Oil drain
Compressor outlet
Exhaust outlet
Exhaust inlet
Heat protection
Turbinehousing
KIT:
Borgwarner SXE Oil in Kit Turbo 1 x Straight + 1 x 90 Degree AN4 + Alu Heat Shield
1 x Straight & 1 X 90
In stock
In stock