Sachs -765 Bmw M5 E34
Sachs
Reviews
Sachs -765 pressure plate (clutch cover) Bmw M5 E34
Model: 765. Bmw M5 E34 Year. 88-92 (3.6l)
Diameter: 240mm
Performance:
about 600nm with organic clutch disc
+ about 25% with our sinter clutch disc (6-puck)
+ about 30% with our sinter clutch disc (4-puck)
The pressure plate is intended for 9.2 mm thick clutch disc . All our sinter clutch disc are 8mm thick.
Mounting:
If you use a clutch disc thicker than 9.2 mm, the pressure plate needs to be used with spacers with the same thickness as the difference between 9.2mm clutch disc as in your thicker clutch disc. For example if you use 10mm thick clutch disc you need to use spacer behind the pressure plate with thickness of 0.8mm.
If you use a thinner clutch disc as our sinter clutch disc of 8mm, you need to remove (in this case 9.2mm-8mm = 1.2mm) about 1.2mm on the flywheel where the contact surface against the pressure plate is for the pressure plate to get closer to the surface where the clutch disc is located.
----------------
Guides & Info
Snabb leverans på min 765a!
Kört denna på flera bilar, klarar mer effekt än vad som specas.
Konungen av originaltryckplattor! :D
800+nm med kickstarter approved !
Snabb leverans!
Kör denna med deras 4puckade sinterlamell. Har klarat sig bra ända tills jag klev upp till 850nm. Då slirar det när man gör värre starter.
funkar kanon!
Levererar enligt spec och betydligt mer! nm++
Your review:
To send a review, you must be logged in.
Associated products
Clutch
Tenaci Sprung Sinter Clutch disc USA BMW 26 splines 6 puck 240mm
GS6-53DZ / GS6-53BZ
In stock
Tenaci Sprung Sinter Clutch disc USA BMW 320D 22x28,6mm 6-puckad - 240mm
GS6-37DZ / GS6-37BZ
In stock
Tenaci Sprung Sinter Clutch disc USA BMW Getrag ZF 10x35mm - 240mm
GS5-39DZ / Getrag 420 TBAI
In stock
Tenaci Sprung Sinter Clutch disc USA BMW Getrag ZF 10x28,6mm 6-puckad - 240mm
S5D-310 ZF-310 / S5D-250 / S5D-320 ZF-320 / Getrag 420 TBAB
In stock
Tenaci Sprung organic Clutch disc BMW, 320d GS6-37dz 22 splines
GS6-37DZ / GS6-37BZ
In stock