Exhaust manifold Volvo 16V stainless steel
Exhaust manifold
Reviews
Exhaust manifold Volvo 16V stainless steel
Fits in Volvo 240, 740, 940 chassie with B230 16v engine
Our stainless manifold we manufactured in stainless steel 321L 42,4x2mm, these welded with backing gas on the cleaned carefully for best results.
Attention
If you pick turbo flange with twin entry you will not ge the wastegate flanges welded. You will only get two pipes to weld these on yourself. These flanges are not included.
If you pick turbo flange with single entry you can choose if you want with or without welded turbo flange. ANd there will be one single wastegate pipe for this.
----------------
Guides & Info
The manifold is fairly expensive. For that price I do (as a German) expect a good quality product.
This manifold does not fit to the cylinder head. Either I have to grind the flange (which is too high on some areas) or the head so that it bolts onto it.
The EGT sensor bungs are not 1/8"NPT but G1/8". So the egt sensors will not fit and need a fairly rare 1/8" Npt female to G 1/8" male adapter. Works but is not that "sexy" to look at.
The flanges are machined on a belt sander. Looks like 40 grit. I doubt that it will seal properly, haven't tested it yet. Also they are not 100% flat. I will probably have to go to a machine shop for the final finish.
Welds itself are OK and from the inside all welds are grinded, so the surface is smooth.
Your review:
To send a review, you must be logged in.