Oil catch tank 2 litre barb fittings
OBP optimum balance products
Help others choose right. Be the first to write a review!Write a review
Oil catch can 2 litre
A small and easily positioned oil trap that holds 2 litre of oil. Three hose / barb fittings for inlet and outlet. Mounting brackets for easy attachment to eg firewall. Drain plug at the bottom with gasket to prevent leakage.
Measurements: WxHxD 150mm x 200mm x 70mm
Inlet / Outlets: Barb connections (fits 12,7mm ID hose)
Drain plug: 1x
Sight tube: Yes
Material: Aluminum 6061 (T6061)
Oil catch tank
Oil catch tank for race cars, tuned engines and turbo systems. Originally, the crankcase ventilation is routed back to the intake pipe and original oil trap can not handle oil mist that is pumped with high forces. Over time, both pressure pipes and intercooler will be clogged with oil wich reduces engine power, internal engine gaskets will start to leak, turbocharger oil return will be prevented from evacuating oil back to the oil pan with turbo damage as result . With an oil catch tank you will avoid these problems and you will significantly improve engine ventilation. A must on tuned cars is good crankcase ventilation.
If you want to weld your own catch can you will find aluminum sheet, brackets and accessories linked.
Weld fittings for hose and lots of connectivity parts can be found as well.
Hoses with suitable hose clamps is also avalible.
Be first to write a review about this product!
To send a review, you must be logged in.